Digital Signage
Bitcoin Mining Hardware
Systems
Electronics
Medical Equipment
Antminer APW12A power supply
In stock
| DC Voltage |
12.3V |
|---|---|
| Rated Current (277V input) |
15A |
| Ripple & Noise |
<1% |
| Voltage Accuracy |
12.2V – 12.4V |
| Line Regulation |
<1% |
| Load Regulation |
<1% |
| Setup Time |
<2S |
| Short Circuit Protection |
>10mS |
| Voltage Range |
277V AC ± 10% |
| Frequency Range |
60Hz |
| Power Factor |
>0.99 (full load) |
| Leakage Current |
<1.5mA (220V 50Hz) |
| Output Short Circuit |
Yes |
| Overheat Protection |
Yes |
| Over-current Output |
291A – 350A (protection value varies under different voltage) |
| Operating Temperature |
-20 – 45℃ |
| Operating Humidity |
20% – 90%RH (non-condensing) |
| Altitude |
< 2000m |
| Dimensions |
254.6mm * 251.6mm * 63mm |
| Net Weight |
3.6kg MAX |
| Cooling System |
Forced-air cooling |
| Noise |
45dBA |
Bitmain Antbox N3 Mobile Mining Container 40HQ 1300KW Outdoor V1
In stock
Bitmain Antbox N5 Mobile Mining Container 20HQ 658KW Outdoor V2
In stock
G4S SE1255 12-GPU Mining Enclosure Kit
In stock
| Motherboard |
4 x USB ,GM-B250 ,slot distance: 55mm |
|---|---|
| CPU |
Intel G3900 |
| RAM |
DDR4 8GB |
| SSD |
SSD 128G |
| GPU Slots Quantity |
12 Slots |
| Case |
1.2mm SGCC Zinc-coated Steel |
| PSU |
220V AC/50-60Hz/12A |
| Fan |
8 x 4500RPM fans |
| TOTAL POWER |
2500W±10% |
| Application Temperature |
-10~45 ℃ |
| Dimension |
80.5 x 44 x 17.5cm |
| Packaging Dimension |
87.5 x 52 x 26cm |
| Packaging Details |
Carton + PE Foam |
G4S SE0965 8-GPU Mining Enclosure Kit
In stock
| Motherboard |
2 x USB ,G4S-B85 ,Slot Distance: 65mm |
|---|---|
| CPU |
Intel G1840 |
| RAM |
DDR3 4G (DDR4 8G Optional) |
| SSD |
64G (SSD 128G Optional) |
| GPU Slots Quantity |
8 Slots |
| Case |
1.2mm SGCC Zinc-coated Steel |
| PSU |
110-230V AC/50-60Hz/12A |
| Fan |
4×12038 Fans |
| TOTAL POWER |
1800W±10% |
| Application Temperature |
-10~45 ℃ |
| Dimension |
73 x 39 x 20cm |
| Packaging Dimension |
79 x 45 x 25cm |
| Packaging Details |
Carton + PE Foam |
| Net Weight |
15±5% KGS |
| Gross Weight |
16±5% KGS |
| Air Shipping Weight |
17.00 KGS |
Huapeng 3000 KVA Pad Mounted Transformer
In stock
| Capacity |
3000 kVA |
|---|---|
| Phase |
Three-phase |
| Impedance |
5.75% |
| Temperature Rise |
65°C (average winding rise) |
| Cooling Class |
KNAN with FR3 oil |
| Vector Group |
Dyn1 |
| Efficiency Standard |
DOE-2016 compliant |
| High Voltage |
12 ,470 Delta Volts |
| High Voltage BIL |
95 kV |
| High Voltage Configuration |
Dead Front ,Loop Feed |
| Taps |
2 – 2.5% taps above and 2 – 2.5% taps below normal |
| Load-Break Switching |
15-38kV ,200A 4-Position T-Blade |
| Overcurrent Protection |
Bayonet Fuses in series with Partial-Range Current-Limiting Fuses |
| Expulsion Fuses |
Bayonet Fuses |
| Bayonet Holder |
Silver-Plated Holder Fuses |
| Low Voltage |
415 Volts |
| Low Voltage BIL |
30 kV |
| Low Voltage Class |
1.2 kV |
| Low Voltage Bushings |
Integral copper 12-hole spade bushings |
| Bushing Arrangement |
Staggered LV Bushing Arrangement |
| Bushing Supports |
Standard LV Bushing Support Assembly |
| Cabinet Hardware |
Penta-head cabinet door bolts |
| IEEE K-Dimension |
Loop feed per IEEE C57.12.34-2015 Figure 11 min. dimensions (without bails) |
| Coatings |
Munsell Green (Munsell 7GY 3.29/1.5) topcoat |
| Gauges & Fittings |
Drain valve (1″) with sampler in LV compartment ,Liquid level gauge ,Pressure relief device (35 SCFM) ,Pressure/vacuum gauge ,Thermometer (dial type) |
| Tank Accessories |
IEEE standard two-hole ground pads |
| Cover |
Bolted or welded cover with handhole |
| Gauges Location |
Inside Main Cabinet on Front Plate |
CSA 336 unit Mining Container
In stock
| Substructure |
12192*2438*2896mm Shipping Containers ,compliant with fire safety requirements ,Single weight 6 tons；Safety escape doors at both ends |
|---|---|
| switchgear |
14set 80A circuit breakers to control 14 PDUs，SCCR 35KA ,CSA certification ,UL Listing for Main Circuit Breaker 1200A |
| PDU |
CSA certification ,PDU unit single control ,will not cut off the power of the whole strip.Sockets are made of C20，Instantaneous current up to 20A |
| internal addition of anti-dust netting；Snow guards on the outside |
1 |
FogHashing B100 1MW Dry Cooler
In stock
| Dimensions |
11800mm(L) * 2200mm(W) * 2350mm(H) |
|---|---|
| Miner Capacity |
200 |
| Cooling Capacity |
1MW |
| Coolant Volume |
7000L |
| Cooling Type |
Dry Cooler |
| Input voltage: |
3-phase 350-480V 50/60Hz |
| Max Power Load |
1437kW |
| Operating Power |
100kW |
| Max Inlet/Outlet Temp |
48/56°C |
| Ambient Temperature |
-25°C~48°C |
| Monitoring |
1. Tank level mini-LED 2. Web-based portal for remote control 3. Standard SNMP protocol 4. Email integration |
ASIC Noise Reducing Silencer
In stock